Tuesday, October 16, 2018

What is the importance of a Cooling tower manufacturer?

There are all sorts of Cooling Tower designs manufacturer coming today. The wooden tower is hardly used due to its short life span and the cost of wood getting significantly high these days and since we have better options, one would buy a tower which can add feasibility to his business and reduce cost.

A "cooling Tower" is the ultimate mechanism to treat your equipment and cool down water efficiently.  It is a heat rejection device specifically made to cool down equipment by cold water. Common applications include cooling the recycling water used in oil refineries, petrochemical, thermal power stations and HVAC systems for cooling buildings.

We have two main types of cooling towers that are natural draft and induced Draft cooling towers.

Big industries preferred cement or RCC made cooling towers but now that requirement has faded away as we have cheaper natural draft cooling towers made of structural steel.



How a Cooling tower manufacturer makes the difference:

Now that everybody feels to have the Best Cooling tower for one’s company, choosing the cooling tower manufacturer is also one fine approach to get things right in the very first place of your tower installation.

People prefer different Cooling Tower towers, which have different designs and make type but selecting a bad design or a tower that requires exhaustive maintenance will exacerbate his costing and budget.

Here comes the role of the best "Cooling Tower" manufacturers.

Why do we think a Cooling Tower Manufacturer can be of prime importance?

Whether it’s an FRP Cooling tower manufacturer or a steel tower maker, it can be of immense help in selecting the best cooling tower in the following ways:

1. Requirement: A professional cooling company will study your firm’s requirement like what size tower will you require and whether you should go in for a galvanized tower or need a fiber reinforced plastic tower. A galvanized steel is not successful in a place where the water hardness is high. The tower maker will help you understand whether you should go in for a SS tower or a FRP one. Also based on the requirement of recycling capacity, he will help you choose an optimum size tower.

2. Tower Capability: To determine the chiller you need, the incoming water temperature, the chilled water temperature required and the flow rate are vital to know the tower capacity and detect how much cooling capacity per BTU/hour is needed. Tower capacity depends upon the volume of water to be treated and how much cooling is vital to be efficacious. This way, you will know the ideal tower size for your needs.

3. Tower design: Cooling towers are needed to cool a certain flow rate from one temperature to another temperature at a certain wet bulb temperature. While the FRP square cooling tower is an economic tower, round are even superior towers as the design of the shell structure facilitates the smooth air draught and prevents any dead air packets. If you have a contamination free water, then closed circuit cooling tower can also be permitted.

4. Water quality: Whether your factory is located near oceanic regions or it is on dry land, different areas have different water quality. Some places have harsh calcific content in water and some are just high in TDS. A tower manufacturer can suggest you the best Cooling tower considering the water feature. In harsh water conditions, FRP towers last long but if you need to have a galvanized one, it will incur high maintenance cost because calcite and silica scaling will erode the protective layer of steel and it will have a reduced life.



5. Installation process: The manufacture has a team of people who know how and where it is feasible to install the tower. They will study the area and water sourcing and suggest you further steps to select which type of tower will be suitable. Also a professional tower manufacturing concern commonly does the installation by itself because this process needs expertise.

6. Component availability: A tower has many internal components and it runs on any of the three drive types namely belt drive, gear drive and direct drive. Some moving components wear off overtime and need replacement. Making components easily accessible is also a good gesture we can expect from a sought after Cooling Tower Manufacturer.

7. Cost analysis: Cooling tower makers are vital to give you a correct calculation of expected costing and the depreciation over the years. Each tower type has a separate cost incurrence and life expectancy. The tower maker will help you choose a tower that fits your pocket and also cost.

8. Transportation: Famous tower makers like Kooldrop provide transportation assistance to site so that can be really beneficial and time saving. If you require a good Cooling tower in Delhi, what’s best if you get cargo facility with it also?

In case you like to ease the problem of choosing the best tower for your business, then taking consent from the Cooling tower manufacturer is the most ideal thing you could do for your company and yourself!

Friday, October 12, 2018

FRP cooling tower manufacturer in India

FRP Cooling Towers don’t have a long history in India but because they are very user friendly, easy to transport and easy to assemble, they have become every user’s choice in the current time. FRP cooling tower manufacturer in India or fiber reinforced plastic is a very durable material that doesn't rust, give way or compromise on weight.  Therefore, they have literally replaced the wooden Cooling Tower Manufacturer because of the longevity and low cost run and maintenance.






Importance of FRP Cooling Towers in the modern world:

FRP Cooling Tower Manufacturers in India have become a boon to many small and cottage industries which require small yet comfortable setups within the budget to provide sufficient water management without hefty investment on tower construction. FRP suits them best because it is vibration and velocity resistant.


With some of the best makers of FRP cooling towers manufacturer in the country, it has become the first preference of today’s cooling tower Manufacturer replacement substitutes. KoolDrop, perhaps the Best Cooling Tower manufacturer Company in India in the FRP line, believes that FRP is today’s demanded product because it has too many good features like:


1. Very low upkeep due to the material factor which is rustproof, waterproof and termite proof.

2.  Even FRP costs less unlike wood or stainless steel or concrete.

3.  IT does not rust, corrode or decay like metal and wood.

4.  Due to its lightweight, FRP can be easily assembled, installed and replaced.

5.  Even though it is light weight, it is quite flexible and has high endurance.



There can be Stick Built Towers, modular or shop built Cooling Towers. While modular towers are round in shape or may be custom designed, stick built towers are similar in shape to wooden towers but every component of a stick tower is made of fiberglass components including an FRP ladder and grating yet the quickest solution is a shop built Cooling Tower which can be factory assembled or shipped anywhere easily. It’s a plug and play sort of Cooling tower and can be made as per user’s requirement.

Being compact in size, FRP Cooling towers save a lot of space as they don’t require a huge area for installation.  FRP Cooling Tower manufacturer Companies assemble and fix them with polyester resin to complete its setup.

Just like the conventional towers, FRP cooling towers also have the same purpose although  they can be smaller in shape and size. But the quality of design is what you would acquiesce with alacrity. The structural joints do not obstruct any air flow and so the most desirable circulation is achieved to cool down water. FRP Cooling towers have PVC fills and eliminators that don’t rust or corrode.

If you need more information, then, an FRP Cooling Tower Company will guide you best on your requirement.

Tuesday, September 25, 2018

FRP Rectangular Cooling Tower Manufacturers

Cooling Tower Manufacturer

The objective of rectangular Cooling Tower Manufacturers is to offer maximum surface area to cool hot water just like other circular towers but the design and working principle are different. By name, rectangular towers are square in shape and offer good water cooling tower system manufacturer.

Working Principle of Cooling Tower Manufacturers:
Square type cooling towers manufacturer operate on counter flow principle. The water travels to the chamber via the main header pipe connected into the tower. If multiple towers are conjoined, the header pipe will divide into branch pipes that will push the water through splash caps with a low pressure drop.  This lets the water flow down via the tower wall in the form of a thin water film and small droplets over a large fill surface to fasten heat transfer.

Gradually the water fallen through the fill is collected in an FRP basin at the bottom of the tower. The lower portion of the tower is open on all sides to allow atmospheric air enter the tower walls and it is pulled up by the fan on top of the tower opening.  Counter flow cooling is seen here when the warm water film is traveling down the tower walls while the air breeze going upwards cools it instantly. The transfer of heat takes place by evaporation and direct contact in rectangular Cooling Towers Manufacturer. The air inlet is covered by PVC Mesh for free flow of air.

Cooling Tower Manufacturer


Highlights of a Rectangular Cooling Tower:
  • Components are made of corrosion resistant and fire retardant FRP including Casing, Basin, Fan deck and stack.
  • Hot dip galvanized supporting material lasts long.
  • Film fills are PVC made with heat resistance.
  • All components are made of PVC including the water distribution system with PVC pipe and PP splash cap.
Advantages:
Square FRP cooling towers are rust and corrosion free and so are long-lasting.
They are energy efficient with a low pressure drop.
PVC fills do not rust and hence have longer life.

Main Features Cooling Tower Manufacturer:
  • Since the whole tower is made of FRP and PVC components including the casing, Basin, Fan deck and Fan stack, they don’t rot or corrode.  Fire-retardant FRP adds to its protection.
  • Supporting structure is made of hot dip galvanized material for durability.
  • PVC film fills can resist high heat temperatures.
  • PVC pipe and PP splash cap handle the water distribution system efficiently.
Cooling Tower Manufacturer

Rectangular Cooling Tower manufacturer and suppliers in Delhi NCR provide good deals for your business. Some of the Best rectangular Cooling Towers Manufacturers like Kooldrop offer different tower structures at low price than other sellers and are sturdy in construction and have abrasion resistance.